Dynatech Furnaces historically has always prepared itself for future customer requirements and as part of this continuing approach and philosophy, Dynatech is gearing itself up for the stringent requirements and demands that the auto component manufacturing companies will be requesting, as they modernize & augment their operations in India and as they expand their marketing and customer base globally.

As India’s biggest and most experienced Heat Treatment Furnace manufacturer (since 1985), Dynatech has had extensive exposure and experience with the sophisticated needs of Auto Component Heat Treatment requirement.

Specifically for Auto Component and Engineering Component Heat Treatment requirement, Dynatech has prepared itself with the following features and facilities:


 
 
An ISO 9001:2000 Quality Management Program is under way and should get certified by June 2007.
Dynatech is fully qualified and experienced with Graphite Hot Zone Insulation & Heater design, manufacture and assembly – understanding the unique strengths of this insulation and heater system.
Dynatech has pioneered the “Fit & Forget” Graphite Hot Zone design that has stood the reliability with time
Entire Hot Zone of Dynatech vacuum furnace is faced with CFC panels which enables minimal, if not, zero maintenance of it’s hot zones, as a standard feature.
Dynatech vacuum furnace vessels are designed and manufactured as per ASME Sec VIII Div 1 U Code Stamped
Dynatech provides double walled carbon steel and stainless steel vessels.
Dynatech vacuum furnace are equipped with internal heat exchanger and quench fan with motor.
Dynatech is fully geared to come up to the demanding leak tightness requirements of the vacuum furnaces for auto-component brazing requirement – it has demonstrated vacuum leak rates of upto 1 micron/ Hour
Dynatech is familiar and has designed vacuum furnaces that meet or exceed specifications like GM DC-9999-1, Ford AMTD-2710, NADCA, AMS2769A, AMS 2759/7 A etc.
Dynatech vacuum furnaces comply with AMS 2750 Pyrometry.
Dynatech has sufficient experience and expertise in design, manufacture and maintenance of high Vacuum requirements of the auto-component brazing needs (order of 10-5 torr or better).
Dynatech vacuum furnaces provide unique features and facilities specially aimed at meeting or exceeding auto-component specific requirements like distortion etc.
Dynatech vacuum furnaces provide Isothermal Quench facility with unique mar quench features.
Dynatech vacuum heat treat furnaces provide inert gas pressure quench facility upto 10-bar (a), as a standard feature.
Dynatech vacuum furnaces provide partial pressure facility, as a standard feature.
Dynatech`s unique quench gas flow adjustability and flexibility (with only pneumatic movements) enables customers to adjust quench gas flow patterns to suit loading density and component geometry.
Dynatech`s unique electrical feedthrough design ensures that the feedthorughs do not allow high current arcing at the feedthorughs and thus provide a long lasting feedthrough connection.
Dynatech “Fit & Forget” Graphite Hot Zone also provides the lowest steady state heat loss figures of under 5 watts/ sq. inch at 2,200 F (1,200 C) operating temperature and lower values at lower temperatures.
All Dynatech vacuum furnaces are provided with PC based SCADA Control System and or with Touch Screen Control System with Remote Access and Trouble Shoot facility.
 

Vacuum Furnaces Horizontal Front Loading Hinged Door DFHP Series
 
  Vacuum Furnaces Pull Out Car Bottom DPHP Series  
 
Vacuum Furnaces Front Convective Heating Fan DCHP Series
Vacuum Furnaces Vertical Bottom Loading DBVP Series

 
   Copyright 2007    |    All Rights Reserved www.dynatechfurnaces.com